Table of Contents
Advertisement
r
a
emote
ccess
remote surveillance
SETTING
You can check and change the parameter settings as
configured in the DVR
1.
BANDWIDTH: Set the bandwidth in kbps (128k, 192k,
256k, 384k, 512k, 1024k) that you want to allocate for
traffic based on internet bandwidth available. This
bandwidth does not include audio.
2.
FILE SAVE PATH: The path where you want to save
captured picture and recording video.
Remote Setup - Setting Screen
HOST INFO
This interface allows you to view system information such
as HDD status, remain record time, firmware version and
MAC Address. All the information is for viewing only and
cannot be changed remotely.
Remote Setup - Host Info Screen
MAINTENANCE
You can check and change the parameter settings as
configured in the DVR along with rebooting the system and
upgrading firmware.
1.
TELECONTROL: Remote reboot DVR or format HDD.
2.
REMOTE UPGRADE: Remote upgrade DVR firmware.
Remote Setup - Maintenance Screen
Page 40
m
p
obIle
hone
Mobile Setup
Mobile allows you to send alerts to your cellular phone running Windows Mobile
Pro (6.0 or later), Symbian (S60 3rd or later), Android, Blackberry (Curve 8900,
Bold 9700, Tour 9630), or iPhone on 3G networks. The instructions on how to
install and use the software for the different phone operating systems are shown
below. This installation CD includes the software needed for Windows Mobile Pro,
Symbian, Android, and Blackberry. To use with an iPhone you need to download
the software from the iTunes app store.
For all phones configure MOBILE settings as follows:
1.
From the MAIN Menu click ADVANCED then MOBILE.
2.
Under MOBILE NETWORK, select 3G, 2.75G, or 2.5G. NOTE: Contact your
cellular provider if you are unsure about the network of your cellular phone.
3.
Under MOBILE PORT, enter your mobile port number. Note: this port can't
be the same with any other port and different DVR's should have different
sever ports.
4.
Click APPLY. Click OK in the confirmation window.
5.
Click EXIT in all menus until all windows are closed.
Mobile Access
NOTE! Before you can use Mobile Access you need to setup
the network configuration on the DVR and forward port 100 as
described in the "Port Forwarding" section of this manual.
Windows Mobile Pro (6.0 or later) OS Phones
Step 1: Program Download
Step 2: Select Install Path
Copy the installation program
Click the program and start to
"Meyesetup.CAB" from the
install it, just select default path
Installation CD to the "My
when it ask you to select install
Documents" folder on your mobile
path.
phone.
Download Software
m
obIle
setup and control
Mobile Setup
Step 3: Install Program
Click the Install button to begin
installation.
Select Install Path
Install Software
Page 41
p
hone
Advertisement
Table of Contents
