Craftsman Nextec 320.17562 Operator's Manual page 11

BATTERIES:
The battery pack is equipped with Lithium-Ion rechargeable batteries. The
duration of use from each charge will depend on the type of work performed.
The batteries in this tool have been designed to provide maximum trouble-
free life. Like all batteries, they will eventually wear out. Do not disassemble
the battery pack or attempt to replace the batteries. Handling of the batteries,
especially when wearing rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, read, understand and follow this
operator's manual.
• It is good practice to unplug the Charger/Adapter and remove the Lithium-
Ion battery pack when not in use.
For Lithium-Ion battery pack storage longer than 30 days:
• Store the Lithium-Ion battery pack where the
temperature is below 80°F (26°C) and free of
moisture.
Store Lithium-Ion battery packs in a 30%-50%
charged condition.
After every six months of storage, fully charge
the Lithium-Ion battery pack.
Exterior may be cleaned with a cloth or soft
non-metallic brush.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries properly.
This product contains lithium-ion batteries. Local, state, or federal laws may
prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local
waste authority for information regarding available recycling and/or disposal
options.
WARNING: Upon removal of the battery pack for disposal or recycling,
cover the battery pack's terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble the battery pack or remove any of its
components. Lithium-Ion batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects and/or body parts, as
short circuit may result. Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
PROBLEM
The tool does not work
Bit cannot be installed
Motor overheating
CAUSE
Battery is depleted
Sleeve is not released
Bit does not fit the sleeve
Make sure that the cooling
vents are free from dust
and obstacles
SOLUTION
Charge the battery
Release the sleeve
Use a 1/4" shank bit
Clean clear vents.
Do not cover vents
during operation
17562 ManuaLRevised_$0 0607 Page 20 17562 ManuaLRevised_i0 0607 Page 2i