Advertisement
TOOL USE AND CARE
• Checkfor misalignment or
binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool's operation. If damaged,
have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
• Use only accessories
that are
recommended
by the manufacturer for
your model. Accessories that may be
suitable for one tool may create a risk of
injury when used on another tool,
SERVICE
• Tool service must be performed
only by
qualified repair personnel, Service or
maintenance
performed by unqualified
personnel may result in a risk of injury.
• When servicing a tool, use only identical
replacement
parts. Follow instructions in
the maintenance
section of this manual,
Use of unauthorized
parts or failure to
follow maintenance
instructions may
create a risk of electric shock or injury,
Before you begin, make sure your car is
clean and dry. The work area should be dry
also. If necessary,
remove road tar with a
general cleaner before polishing. Also,
remove excess grease spots, bug stains, etc.
The function
settings
have been factory
preset to achieve
maximum
performance.
Use APPLY setting when applying
paste
or liquid wax to the surface to be polished.
Use POLISH/BUFF
setting when polishing
the applied
wax and for the final buffing.
NOTE:
The Wax & Polishing
Solution
containers
shown in the illustrations
are
representative.
Yours may look different.
A
Place the blue wax applicator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly around
the underside of the pad.
B FOR PASTE WAX
Spread about a heaping teaspoonful
of wax
evenly over the entire surface of the wax
applicator bonnet. Use a putty knife or any
fiat object. DO NOT APPLY WAX DIRECTLY
TO CAR.
C FOR LIQUID WAX
Apply three swirls of liquid wax on the wax
applicator
bonnet. DO NOT APPLY WAX
DIRECTLY
TO CAR. This first application
should
do about 1/4 of the car. For the
second
and third applications
of wax, use
half the quantity
stated above. The bonnet
will not absorb
as much when reloading.
D
Set the function
selector switch to APPLY.
The polisher is turned on and off by
squeezing and releasing the trigger
switch. The LOCK button on the trigger
switch can be used to lock the machine in
ON position while it is running. To lock,
depress the LOCK button as you release
the trigger switch. To release LOCK, press
the trigger switch.
Lock butlon
0
3
Advertisement
