Tools Required For Assembly - Craftsman 486.24331 Owner's Manual

32" spiker spreader
Hide thumbs Also See for 486.24331:
Table of Contents

Advertisement

TOOLS
REQUIRED
FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 3/4" or Adjustable
Wrenches
(1) Screwdriver
(1) Pliers
Assemble the grip onto the lift handle. See figure 2.
On the right side, insert a 5/16" x 1-3/4" hex bolt
through a 5/16" flat washer and then through the rear
hole in the hopper and the hitch tube. Assemble the
transport tube and then the lift handle onto the bolt
and secure with a 5/16" hex lock nut. Do not tighten
yet. See figure 2.
Assemble a 5/16" x 1" hex bolt and 5/16" hex lock nut
to the bottom hole in the transport tube assembly and
the lift handle. Do not tighten yet. See figure 2.
Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
Attach a hitch tube to the front hole in the right hand
side of the hopper using a 5/16" x 1-1/4" hex bolt, a
5/16" flat washer and a 5/16" hex lock nut. Assemble
the bolt and washer from inside the hopper. Do not
tighten
yet. See figure 1.
Repeat on the left hand side of the hopper.
LIFT
GRIP
5/16"FLAT
HANDLE
_
WASHER
\
5/16" x 1-3/4"
HEX BOLT
5/16" x 1-1/4"
5/16" FLAT
HEX BOLT
WASHER
HITCH TUBE
5/16" HEX LOCK NUT
FIGURE 1
5/16"HEX
TRANSPORT
TUBE
LOCK NUT
FIGURE 2
On the left side, insert a 5/16" x 1-3/4" hex bolt
through a 5/16" flat washer and then through the rear
hole in the hopper and the hitch tube. Assemble the
transport tube onto the bolt and secure it with a 5/16"
hex lock nut. Do not tighten yet. See figure 3.
5/16" x 1-3/4"
HEX BOLT
5/16"FLAT
WASHER
5/16"HEX
LOCK NUT
FIGURE 3

Advertisement

Table of Contents
loading

Table of Contents