For ease of operation and maintaining
troL hold your Grinder with both hands as shown in
Clamp or otherwise secure the work to prevent it
Always point the cutter so that if it should slip there
is no danger to any part of your body. Never wear
Grinder. They could get caught in moving parts caus-
ing injury. Always keep head away from grinding
area. Hair could get caught in moving parts causing
with a collet
receive 1/4" diameter mandrels, A collet reducer is
,supplied which, when used with this coUet shaft, will
receive 1/8" diamter mandrels.
See F/g. 2,
The maximum diameter grinding wheels recommended
for use with 1/4" mandret is 1 ", See Fig. 3.
Grinding wheels should be used when working wilh hard
materials. Do not use grinding wheels when working with
soft materials, such as nonferrous
metals such as aluminum, brass, copper, etc. will load up
the wheel and willnot aJlow wheel Io cut as it was designed.
Never use wheels rated below 26,500
RPM,Wheels rated less tha,q 26,500 could disintegrate
while in use causing serious injury.