To Replace Headlight Bulb; Interlocks And Relays; To Replace Fuse; To Remove Hood And Grill - Craftsman 917.254850 Owner's Manual

SERVmCE AND ADJUSTMENTS
' ,,i, u i _ , ii i,ll . ,................. ii i ...............
TO REPLACE HEADLIGHT BULB
o Raise hood°
° Pull bulb holder out of the hole in the backside of the
grJ{io
. Replace bulb in holder' and push bulb holder securely
back into the hole in the backside of the grill.
o Close hood.
TO REMOVE HOOD AND GRILL (See Fig. 29)
° Raise hood,,
o Unsnap headlight wire connector,,
o Stand in front of tractor,, Grasp hood at sides, tint
forward and lift off of tractoL
• To reinstall, slide hood pivot brackets into slots in
frame°
o Reconnect headlight wire connector and close hood,.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your' tractor to run
poorly, stop running or prevent it from starting.
° Check wiring. See electricaE wiring diagram in Repair
Parts section of this rnanual.
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located in the engine compartment, directly
in front of the dash,
HOOD
HEADLIGHT
WIRE
CONNECTOR
FIG, 29
24