Table of Contents
Advertisement
REMOVmNG BITS
See Figures 5 o8.
m Lock the switch trigger by placing the direction of rota-
tion selector in center position.
m Loosen the chuck jaws from dril! bit.
m To loosen: grasp and hold the collar of the chuck with
one hand, while rotating chuck body with your other
hand.
NOTE: Rotate chuck body in the direction of the arrow
marked UNLOCK to loosen chuck jaws.
m Do not use a wrench to tighten or loosen the chuck
jaws.
m Remove dril! bit from chuck jaws.
ADJUSTABLE
TORQUE
CLUTCH
The dril! is equipped with an adjustable torque clutch for
driving different types of screws into different materials.
The proper setting depends on the type of matedal and
the size of screw you are using.
TO ADJUST
TORQUE
See Figure 9.
[] Identify the twenty-four
torque indicator settings !ocated
on the front of the drill.
[] Rotate adjusting ring to the desired setting.
1 - 4
For driving small screws
5 - 8
For driving screws into soft
material
9 - 12
For driving screws into soft and hard
materials
13 - 16
For driving screws in hard wood
17 - 23
For driving large screws
_,1
For heavy drilling
TO DECREASE
ADJUSTING
TORQUE
RING
Fig. 8
14
Advertisement
Table of Contents
