Craftsman 757.24525 Operator's Manual page 7

MOUNTING BRACKET AS6EMBLY _ _---_'__ ,_.
11' Bendt°P and b°tt°m tabst°wards back °f unit _"_'_ _"_"" ""_ _r
12. One at e time, place Side Strap(3) intothe
BaCk Plate(2)as shown.
13. Bendtabstowardsmiddle of uniL
NOTE: Side Straps will seem very looseonce
€onnected, w avingfrom side to side. This
allowsthe bracketto connectto different
varietiesofCraftsmanFront EngineTractors.
"TRACTOR SETUP"
Lawn Tractor
14. Usinga 3/8" x 1"Hex 8olt(8). Special
W_sher(11),and PivotBushing(10),repiaoethe
two existing Upper Bottson your tractorhitch
platsas shown,
Glrden Tractor
Using3/8" x 1-114"Hex Bait(12).speci_t
Washer(11).Pivot Bushing(10).Special
Washer_l-inside of frame)and 3/8" Lock
Nut(13), replacethe twoUpper Boltsat
each side ofyourtractorhitchptste as
shown.
15. Slidethe Side Strapsback ontothe pivot
bushingsuntilMountingBraskatis level as
shown. Securethe MountingBracketto the
hitchplatewitha 5116"CarriageBolt, Special
Washer,end Knobas shown.
DO NOT REMOVE LOWER
BOLTS.
\
t
J
TRACTOR
7. t,.-Ie,=7,oo