Connect The Telephone Line; Speciallineconsiderations; Roll Overphone Lines; Two-Line Phone System - Brother FAX 1570MC Owner's Manual

INSTALLATION
3) Lightning and power surges can damage this product! We recommend that
you use a quality surge protection device on the ACpower line as well as on
the telephone line, or unplug the telephone line and electrical cords during a
lightning storm.
Connect the telephone line
Connect one end of the telephone line cord to the jack labeled LINE on the left
sideofthe FAXJMFC. Connect t heotherendto a modularwalljack.
Special Line Considerations
Roll Over Phone Lines
A roll over phone system is a group of two or more separate telephone lines that
pass incoming calls to each other if they are bust,: The calls are usually passed
down or "rolled over" to the next available phone line in a preset order.
%urFAX/MFC canworkin a rolloversystem aslongasit isthe lastnumberin
thesequence, so thecallcannotrollawa},: Donotput theFAXJMFC on anyofthe
othernumbers; w hentheotherlinesarebusyand a second faxcall isreceived,
thefaxcall istransferred to a linethat doesnothavea faxmachine.YourFAXJ
MFC willworkbestona dedicated line.
Two-Line Phone System
A two-line phone system is nothing more than two separate phone numbers on
the same wall outlet. The two phone numbers can be on separate jacks (RJ11) or
combined into one jack (RJ14). Your Fb_MFC must be plugged into an RJ11
jack. RJ11 and RJ14 jacks may be equal in size and appearance and both may
contain 4 wires (black, red, green, yellow). To test the type of jack, plug in a
two-line phone and see if it can access both lines. If it can, you must separate the
line for your FAXJMFC.