Table of Contents
Advertisement
3.2
Marvell
The Marvell
Storage Utility is a browser-based RAID management utility for
®
Marvell RAID controllers that allows you to create and manage RAID 0, 1, and
10 set(s) from SATA hard disk drives that are connected to your PIKE 9230 SATA
RAID card.
•
DO NOT combine Serial ATA and SAS disk drives in one volume.
•
Install SATA hard disk drives with similar capacity for optimum performance.
•
Before using the MSU, ensure that Active Scripting or JavaScript is enabled
in your browser.
•
The RAID setup screens shown in this section are for reference only and
may not exactly match the items on your screen due to the controller
version difference.
3.2.1
Enabling Active Scripting or Javascript
Active Scripting is the technology that allows component-based scripting support.
When enabled, it allows the installation of additional scripting engines.
Enabling Active Scripting in Windows
Active scripting may be disabled by default in some versions of Windows
To enable Active Scripting in Windows Explorer:
From the menu bar, select Tools > Internet Options.
1.
From the Internet Options dialog box, select the Security tab.
2.
Select Local internet from the Select a zone to view or change security
3.
settings then click Custom Level...
4.
From the list of settings, go to
Scripting > Active scripting then
select Enable.
Click OK to confirm the settings and
5.
close the Security Settings - Internet
Zone dialog box.
Click OK to exit the Internet Options
6.
dialog box.
ASUS PIKE 9230
Storage Utility (MSU)
®
Explorer
®
.
®
3-3
Hide quick links:
Advertisement
Table of Contents
