Table Of Loose Parts; Assembly - Bosch 4000 Operating/Safety Instructions Manual

i II[_IEI Unpacking and
Checking Contents
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into
a source of power. This cord must remain unplugged whenever
you are working on the table saw.
Model 4000 Table Saw ls shipped complete in one carton.
1. Unpacking and Checking Contents. Separate alI parts from
packing materials and check each one with the illustration and the
list of Loose Parts to make certain alI items are accounted for
before discarding any packing material (Fig. 4).
If any parts are missing, do not attempt to
assemble the table saw, plug in the power cord or
turn the switch on until the missing parts are obtained and are
installed correctly.
2. Apply a coat of paste wax to the table to reduce friction when
pushing the workpiece across the table. Wipe the table thoroughly
with a clean dry cloth.
Table of Loose Parts
ITEM DESCRIPTION QTY.
1 Table Saw Assembly 1
2 Rip Fence 1
3 Table Insert 1
4 Blade Guard 1
5 Miter Gauge 1
2
NOTE: Remove styrofoam block 6 (for shipping purpose only)
located between the table and motor. You may cause damage to
the blade elevation system if trying to raise blade if styrofoam is
not removed.
24.