GE JGBS04 Owner's Manual And Installation Instructions page 10

Usingthe clock and timer.
Throughout this manual, features and appearance may vary from your model
W
Youhave the choice of having the timer show the time
counting down or the time of day. In either case, the timer
will signal at the end of the timer period to alert you that
the time is up.
To Set the Clock
NOTE: When you first p/ug in the range or after
a power failure, the entire ClockFIknerdisplaywill
/ightup.
[] Press tile CLOCKpad.
[] Press and hold tile + or -pad and tile
time of day will change 10 minutes at
a time. To change tile time by single
minutes, give tile pads short taps.
[]
Press tile CLOCKpad to start tile clock.
i iii j)
ToSet the Kitchen Timer
[] Press the KITCHEN TIMER ON/OFFpad.
[_Use tile 4.and -pads to set tile time_:
Short taps on tile 4-or - I)ad change
tile timer's setting one minute at a
time. Pressing and continuing to
hold tile 4-pad increases tile setting
10 minutes at a time.
[] Once you ha;e set yot:u" time_; press
tile KITCHEN TIMER
ON/OFF
pad to
start timing.
_s tile timer cotmts down, a signal will
indicate when one minute is left. _Mter
this signal, tile display will co/mt down in
seconds. \_]/en time rims out, a final signal
will so/md. Press tile KITCHEN TIMER ON/OFF
pad to stop tile signal.
ToChange or Cancel the Kitchen Timer Setting
_._]/en tile timer is co/mting down, use tile
4-and -pad to change tile remaining time,
or press tile KITCHEN TIMER ON/OFFpad
to stop the time_: Tile timer cannot be
cancelled unless you have flllly completed
"set timer" instructions above.
10
Display Clock While Kitchen Timer Is Operating
Pressing tile CLOCKpad while tile timer is
operating will not intertere with tile timer's
operation; tile display will change to show
tile clock, but tile timer will continue to
count down and will still signal when time
is Ill). Press tile KITCHEN TIMER ON/OFFpad
again to change tile display back to show
tile time_: