Sony UP-CR10L Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Printer
  5. UP-CR10L
  6. Operating instructions manual
Sony UP-CR10L Operating Instructions Manual

Sony UP-CR10L Operating Instructions Manual

Operating instructions
Hide thumbs Also See for UP-CR10L:
Table of Contents

Advertisement

Quick Links

See also: Basic Operation Manual , Operating Instructions Manual
Digital Photo Printer
Operating Instructions
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
UP-CR10L
© 2005 Sony Corporation
2-666-583-16 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony UP-CR10L

Summary of Contents for Sony UP-CR10L

  • Page 1 2-666-583-16 (1) Digital Photo Printer Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. UP-CR10L © 2005 Sony Corporation...
  • Page 2 • Reorient or relocate the receiving antenna. Record these number in the space provided below. • Increase the separation between the equipment and Refer to these numbers whenever you call upon your Sony receiver. dealer regarding this product. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Page 3 For the customers in Europe The manufacturer of this product is Sony Corporation, 1- 7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Outline What This Product Can Do ............. 6 Supplied Documentation ..............7 Information Updates................ 7 Chapter 2 Preparations Supplied Accessories ..............8 Controls and Functions ..............9 Front ...................... 9 Rear ..................... 10 Installation..................11 Connecting the Power Cord ..............
  • Page 5 Chapter 4 Operation Operation Outline ................30 Print Types ..................30 Operation Flow..................31 Setting Memory Cards..............32 Using a “Memory Stick” ..............32 Using a CompactFlash Card..............32 Using a SmartMedia Card ..............33 Using a SD Card/MultiMediaCard............33 Using a xD-Picture Card ..............

  • Page 6: Chapter 1 Outline

    The adaptor may not be commercially available High-speed high-quality printing depending on your country or region. Consult your local Sony dealer. Using a newly developed print engine that features a dyesublimation thermal transfer technology, it is possible to print images of lasting beauty at high speed.

  • Page 7: Supplied Documentation

    ® • The Bluetooth word mark and logos are owned by the • Setup Bluetooth SIG, Inc. and any use of such marks by Sony • Printing image data stored on memory cards Corporation is under license. • Troubleshooting • Other product names are the registered trademarks or trademarks of their respective manufacturers.

  • Page 8: Supplied Accessories

    Preparations Chapter found on the manufacturer label located at the rear of the Note unit. These differences are described in this document The location and design of the unit’s power control and the whenever they arise. supplied accessories differ depending on the serial number Supplied Accessories Make certain you have received the following accessories: Paper Tray (1)

  • Page 9: Controls And Functions

    Controls and Functions Front a Display Note Shows the operation screen. Because the display is a touch To avoid loss of image data or damage to the main unit, screen, the user simply touches the field for the desired never attempt to insert a “Memory Stick”, SmartMedia operation.

  • Page 10: Rear

    Front door open Rear For units with serial numbers starting with 11 The seven-digit serial number A Paper holder (page 12) is located here. The paper roll is inserted here. The white areas between printouts are cut off and For units with serial numbers starting with 51 collected in the top portion of the paper holder.

  • Page 11: Installation

    c ~ AC IN (Power Source) Connector (page 11) Installation Connect the supplied power cord here. d Display stand Use this stand to adjust the angle of the display. Connecting the Power Cord e On/Standby button (for units with serial numbers starting with 11 only) Connect the supplied power cord to the ~ AC IN connector Press this button to turn on power to the unit.

  • Page 12: Loading Paper Roll And Ribbon Cartridge

    • An IC board is incorporated in the ribbon cartridge. Do Loading Paper Roll and Ribbon not touch the terminal of the IC board with anything, Cartridge including your fingers or metallic objects. Also, do not strike, bend, or drop the IC board. Handling the paper roll and ribbon cartridge Notes...

  • Page 13: Loading The Paper Roll And Ribbon Cartridge

    Press the latch on top of the paper holder and open the When using the print pack 2UPC-C13 or holder. 2UPC-C15 Remove the adaptors from the paper holder. Adjust the width of the paper holder. When using the print pack 2UPC-C14 Note Attach adaptors to both ends of the paper holder.
  • Page 14 Press the latch on top of the paper holder and open the Notes holder. • If the edges of the paper roll are uneven, make sure to even them out before installing the paper roll. Otherwise a malfunction may occur. •...
  • Page 15 Close the paper holder. Close the front door. Note When closing the paper holder, take care that the leading edge of the paper roll does not stick out of the paper feed opening. Loading the ribbon cartridge Open the side door. Return the paper holder into the unit.

  • Page 16: Removing The Paper Roll And Ribbon Cartridge

    Notes Notes • If it is difficult to insert the ribbon cartridge, remove • There is extra paper on the paper roll. When the ribbon it and try inserting it again. Reduce the ribbon slack cartridge is finished, remove the remainder of the paper by turning the cartridge spool in the direction of the roll and install a new ribbon cartridge and paper roll.
  • Page 17 Remove any paper remnants from the paper holder. Removing the ribbon cartridge Press the latch on top of the paper holder and open the Open the side door. holder. Remove the paper roll. Pull back the latch on the ribbon cartridge to release the lock, and then grasp the ribbon cartridge and remove it.

  • Page 18: Attaching The Paper Tray

    Close the side door. When using the print pack 2UPC-C14 or 2UPC- Attaching the Paper Tray About 100 sheets of printouts can be left on this paper tray. However, the number of printouts which can be Attach the supplied paper tray. accumulated on the paper tray changes according to the environment condition where the printer is used or the printed image.

  • Page 19: Preparing An Expansion Compactflash Card

    CompactFlash card with the unit. Insert the CompactFlash card into the computer. Copy the promotional images. Create the folder “\Sony\UPCR\” in the root folder of the CompactFlash card, and copy the entire folder “\Sony\UPCR\Promotion” into it from the supplied CD-ROM.

  • Page 20: Startup And Shutdown

    The unit starts up, and the following screen appears. Startup and Shutdown Startup Start the unit as follows. For units with serial numbers starting with 11 Verify that no memory card is inserted in any of the front- side memory card slots of the unit. Then press the on/ standby button.

  • Page 21: Shutdown

    Shutdown Checking the Ribbon Cartridge Remainder Complete any pending operations, and then bring up the following screen. You can check the remainder of the ribbon cartridge. At the Start Guide display, touch the top right corner of the screen twice in succession. Shut down the unit as follows.

  • Page 22: Chapter 3 Setup

    Setup Chapter Touch the [OK] button. Setup Procedure The administration screen appears. Before the unit can be used, you must first make various settings. This includes selecting the language and currency, selecting the service mode, and setting up passwords. These settings are made from the administration screen.

  • Page 23: Setting Items

    (Administration) tab Setting Items Lets you limit the number of prints per order and make password settings. The print logs and system logs can also by displayed from this tab. System Tab When the setting is complete, touch the button. Beep Determines whether a beep sound is heard when performing an operation step or when an error has...

  • Page 24: Screens Tab

    • Image size: 640 (W) × 480 (H) pixels • File format: 24-bit Windows BMP • File name: Image 1 = promo1.bmp, Image 2 = promo2.bmp • File storage location: \Sony\UPCR\Promotion • (Import promotional image) This button lets you import a promotional image from memory card inserted front-side memory card slot.

  • Page 25: Template Tab

    Start Guide • (Delete All) Deletes all template data stored on the expansion Selects the time period for which the Start Guide is CompactFlash card. displayed. When the time has elapsed, the unit automatically switches to the promotional image. When Note [OFF] is selected, the Start Guide is not shown.

  • Page 26: Print Tab

    [Position] tab Print position adjustment Lets you specify where in the image the text should be If the print is not properly centered on the paper, you can placed. adjust the position in the X and Y direction. The adjustment range is ±2 mm in each direction. [Color] tab Lets you specify the text color.

  • Page 27: Pricing Tab

    Sharpness On-screen Currency abbreviation Adjusts the outline sharpness of the image. Russian Ruble Swedish Krona Pricing Tab Singapore Dollar Thai Baht Turkish Lira US Dollar Hong Kong Dollar South Korean Won Mexican Peso Brazilian Real Colombian Peso Venezuelan Bolivar East Carribbean Dollar Argentinian Peso Chilean Peso Peruvian Nuevo Sol...

  • Page 28: Administration Tab

    Password Administration Tab Allows you to set whether a password must be entered before printing starts. When set to [ON], a password is required in Full mode and Quick Print mode before printing can begin. Budget code Determines whether a budget code must be input when printing.
  • Page 29 Print Logs The system log information can be exported to the expansion CompactFlash card. Displays the print history of the unit, with one entry for To do this, touch the button. The system log data are each order. exported in CSV format. To reset the print counter, touch the button.

  • Page 30: Chapter 4 Operation

    Operation Chapter Operation Outline Print Types The unit can print photos taken with a digital camera in several different ways, as listed below. Print Select desired images from the contents of the memory card, specify the number of copies, and print. This function is available in all operation modes.

  • Page 31: Operation Flow

    Operation Flow Full mode/Event mode Quick Print mode Touch the screen Touch the screen Select language Select language Select input method Select input method Insert memory card or send images Insert memory card or send images Select print type Select print type Print Border Print Split Image...

  • Page 32: Setting Memory Cards

    Removing the “Memory Stick” Setting Memory Cards When you see a message that prompts you to remove the “Memory Stick”, first push the “Memory Stick” until you hear a click 1, then pull it out 2. A variety of memory cards, listed below, can be set in the drives and slots on the user interface panel to read image data stored on these memory cards.

  • Page 33: Using A Smartmedia Card

    Removing the CompactFlash card Using a SD Card/MultiMediaCard When you see a message that prompts you to remove the CompactFlash card, pull the it straight out. Inserting the SD Card or MultiMediaCard With the notch on the SD Card or MultiMediaCard away Note from you and to the right, completely insert the card into the slot.

  • Page 34: Using A Xd-Picture Card

    Using a xD-Picture Card Selecting Images for Inserting the xD-Picture Card Printing With the v mark on the xD-Picture Card facing up and forward, completely insert the xD-Picture Card into the slot. The procedure for selecting images from the inserted memory card is described below.
  • Page 35 Memo Memo The following buttons are available in the screens that Touching the [Add Date] button on this screen will follow. Touch the buttons when required. cause the shooting date to be printed on each photo. • [Start Over]: Returns to the start screen in step 1. For details, see the section “Adding the Date”...
  • Page 36 Memo If the digital camera with which the photos were taken supports DPOF, the images to print and the quantity for each image can already be specified at the camera. For details, see the section “Printing From DPOF Settings” on page 49. If you wish to print without editing the images, proceed to step 9.

  • Page 37: Verifying Order Contents And Entering A Password

    Verifying Order Contents and Note Entering a Password Do not remove the memory card before this message is shown. Otherwise data on the memory card may be erased or corrupted. Removing and inserting an Verify that the print quantity, pricing, and other items expansion CompactFlash card during printing may are correct.

  • Page 38: Using Index Print

    Touch the language you want to use. Using Index Print This function prints out all images on a memory card in reduced size to provide an index of the contents. The maximum number of images printed on a single sheet is as follows.

  • Page 39: Using Split Image Print

    Insert the memory card into the respective slot on the Using Split Image Print front side of the unit. When the memory card is recognized, the Main Menu appears. This function lets you print several images on a single sheet. Splitting into prescribed-size images such as Touch [Split Image].
  • Page 40 Touch the frame you want to assign the image to. Specify the number of copies (quantity) to print. Use the [+] and [-] buttons to specify the quantity. A list of images stored on the memory card is shown. If you wish to print without editing the images, Select the image by touching it, and then touch the proceed to step 10.

  • Page 41: Using Border Print

    Touch the [Print] button. Using Border Print When printing images stored on the memory card, you can select from a variety of border designs to be printed around the image, and you can also enter text to be printed. This function is available in Full mode and Event mode. To use this function, the expansion CompactFlash card must be inserted.
  • Page 42 Touch the language you want to use. Select the desired border by touching it, and then touch the [OK] button. Precautions about using the unit are shown. Read these carefully and then touch the [OK] button. If you wish to enlarge the selected border, touch the When a Bluetooth USB adaptor is inserted and button.
  • Page 43 Specify the number of copies (quantity) to print. To edit an image, touch the [Edit] button. Use the [+] and [–] buttons to specify the quantity. The edit menu appears. This menu gives access to the Crop & Rotate, Color Adjustment, Red Eye If the [Select All] button has been selected, the Reduction, and Sepia/Black&White functions.

  • Page 44: Printing All Images On A Memory Card

    Memo Printing All Images on a In Event mode, the order contents are not shown and Memory Card printing starts directly. Verify the order contents and enter the password. This function lets you print all images stored on a memory For details on this operation, see “Verifying Order card in one operation, producing one print per image.

  • Page 45: Image Editing

    Insert the memory card into the respective slot on the Image Editing front side of the unit. When the memory card is recognized, the Main Menu appears. The Edit Menu gives access to the following functions: • Crop & Rotate (page 46) Touch [Print All Images].

  • Page 46: Specifying The Layout (Crop & Rotate)

    To rotate the image Specifying the Layout (Crop & You can rotate the image in steps of 90 degrees. Rotate) On the Edit Menu, touch [Crop & Rotate]. This function allows you to trim the image or rotate it, thereby changing the composition of the image. The following screen appears.

  • Page 47: Adjusting The Image Quality

    Adjusting the Image Quality Printing in Sepia or Black and White The following items can be adjusted. You can set the image color to sepia or black and white for • Brightness printing. • Tint • Saturation On the Edit Menu, touch [Sepia/B&W]. •...

  • Page 48: Compensating For The Red Eye Effect

    Touch the button. Compensating for the Red Eye The compensation function is carried out. Effect The result is shown in the small image at the bottom of the screen. On photos taken with a flash, the so-called red eye effect To cancel the compensation function, touch the can sometimes be a problem.

  • Page 49: Adding The Date

    Adding the Date Printing From DPOF Settings You can add the date when an image was shot to the printout. If a digital camera that supports DPOF was used, the This function is available when [Print] or [Border Print] images to print and the quantity for each image can also be was selected from the Main Menu.

  • Page 50: Printing With Bluetooth® Communication

    Printable file formats ® Printing With Bluetooth JPEG: DCF 2.0 compatible, Exif 2.21 compatible, JFIF (4:4:4, 4:2:2, 4:2:0 baseline JPEG formats) Communication TIFF: Exif 2.21 compatible BMP: 24-bit Windows format Depending on the format, some images may not be supported. Using an optional Bluetooth USB adaptor , you can send images from Bluetooth-compatible devices such as mobile...
  • Page 51 34. device. When selecting a printer on your Bluetooth- compatible device, select “SONY UP-CR10L ##.” The alpha numeric characters comprising the right side of the Bluetooth address displayed on the printer’s screen appear in place of “##.” “CF” appears in place of “##”...

  • Page 52: Entering Passwords Using Memory Cards (Remote Password Input)

    [password] Entering Passwords pass=∗∗∗∗ Using Memory Cards 1) “∗∗∗∗” is the password you set. (Remote Password Input) Remove the expansion CompactFlash card, and copy the password file into the root folder of the memory card you intend to use. You can enter a password without using the on-screen The password file cannot be used to enter passwords numeric keypad by simply inserting a memory card.

  • Page 53: Printing From A Computer

    Note Printing From a Computer If the connection is made via a USB hub, correct operation is not assured. When a USB cable is used to connect the unit to a For units with serial numbers starting with 11 computer, data sent from the computer can be printed out using this unit.

  • Page 54: Appendix

    In such cases your Sony service facility or your Sony dealer. the printer will probably not work properly, and may • To store a half-used printing pack, replace it in its even develop a fault if you persist in using it.

  • Page 55: Supported Memory Cards And File Formats

    The write-protect switch position and shape varies Notes depending on your type of “Memory Stick”. • Sony bears no responsibility for damage to your memory card or data while using this unit. Reinitializing (formatting) “Memory Stick” • Operation of “Memory Stick” (up to 32 GB) media on this product is confirmed.

  • Page 56: Compactflash Card

    • Do not remove the “Memory Stick” while reading or Write-protecting SmartMedia card data writing data. In order to protect important data from accidental erasure, • Data may be corrupted in the following cases. a SmartMedia card can be write-protected to prevent data –...
  • Page 57 Write-protecting SD Card data Notes on using memory cards In order to protect important data from accidental erasure, Note an SD Card can be write-protected to prevent data from The following apply to all memory cards except “Memory being written. Stick”.

  • Page 58: Cleaning

    Remove the paper from the back side of the cleaning Cleaning sheet (the side without an illustration). Be careful not to confuse the back and front sides of the cleaning sheet. Cleaning the Inside of the Printer If stripes, scratches, or other marks begin to appear on prints, cleaning the inside of the printer may solve the problem.
  • Page 59 The adhesive surface of the cleaning sheet is exposed Remove the cleaning cartridge, and reinsert the ribbon now, so check again to make sure that none of the cartridge. corners have peeled up and the center has not been raised. Notes •...
  • Page 60 When the cabinet becomes dirty When the printer roller becomes dirty If the cabinet is extremely dirty, soak a clean cloth in When the printer roller becomes dirty, use a soft cloth water, or a solution of water and a neutral detergent, wring moistened with cleaning alcohol to gently wipe the roller out the cloth, and then wipe the surface of the cabinet.

  • Page 61: Troubleshooting

    If you still cannot solve the problem, contact Each printing pack contains two sets of the ribbon your Sony Authorized Dealer. cartridge and paper roll combination. Be sure to use the ribbon cartridge and the paper roll in the...

  • Page 62: Specifications

    USB host port for the USB flash memory 1) May not be commercially available depending on your Memory card slots country or region. Consult your local Sony dealer. “Memory Stick” interface slot (1) 2) The Bluetooth communication function for this unit can SD Card interface slot (1) only be used with DPPA-BT1 adaptors.
  • Page 63 DUE TO FAILURE OF THIS UNIT OR ITS PRINTING MEDIA, ASSOCIATED SOFTWARE, EXTERNAL STORAGE, OR OTHER EXTERNAL DEVICE. • SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR...
  • Page 64 Sony Corporation...

Table of Contents