Loading A File - Yamaha PSR-S650 Owner's Manual

Loading a File

Registration files (extension: usr), Style files (exten-
sion: sty), Song files (extension: mid) and MDB files
(extension: MFD) saved to the USER FILE folder in
the USB flash memory can be loaded to the instru-
ment individually.
NOTICE
• If the same file name already exists in the instrument, it will
be overwritten and erased. Especially, loading the Registra-
tion file will erase all the existing 64 setups. Keep this in
mind when loading a file.
1
Make sure that a formatted USB flash
memory has been connected to the
USB TO DEVICE terminal, then call up
the FILE CONTROL display (page 55).
2
Use the CATEGORY [<] and [>] buttons
to select "Load."
Currently selected file
3
Use the dial to select the file (Registra-
tion, Style, Song or MDB) you want to
load.
4
Press the [EXECUTE] button.
The display prompts you for confirmation. You
can cancel the load operation at this message by
pressing the [-/NO] button.
5
Press the [EXECUTE] button again, or
the [+/YES] button to execute the load
operation.
NOTICE
• Once the load-in-progress message appears in the
display, the operation cannot be canceled. Never turn
off the power or remove the USB flash memory during
this operation. Doing so may corrupt the data on the
device.
9. Using USB Flash Memory
6
When the operation is complete, a "Com-
pleted" message appears briefly, then
returns to the display of step 2. Press the
[EXIT] button to exit from the FILE CON-
TROL display.
7
Check that the file is properly loaded.
• When a Registration file is loaded, press one of
the Registration Memory buttons to call up the
panel settings.
• When a Music Database file is loaded, press the
[MDB] button then confirm that the loaded file
name is added on the display.
• When a Song file is loaded, press the [USER]
button then confirm that the loaded file name is
added on the display.
• When a Style file is loaded, press the [EXPAN-
SION/USER] button in the STYLE section then
confirm the loaded file name is added on the
display.
NOTE
• When loading a Song or Style, you should set whether
the DSP Effect is used for the keyboard performance, or
for Song/Style playback. This is because the DSP Effect
can be used only for either part. Set the "TG Mode"
parameter on the Function display.
59
Owner's Manual