Recording Your Own Performance; Quick Recording Procedure - Yamaha PSR-S650 Owner's Manual

4

Recording Your Own Performance

You can record up to five of your own performances and save them as User Songs 001
through 005. These Songs can be played in the same manner as the Preset Songs.
Once your performances have been saved as User Songs, they can be saved to a USB
storage device (page 58).
 Recordable data
Melody performance and Style playback with chord or section changes can be
recorded to any 16 tracks of the Song.
 Recording methods
• Quick Recording ....... Immediately start recording with Style playback by pressing
• Multi Recording ........ Specify the Song number and the parts for the tracks and

Quick Recording Procedure

1
Enter the Song mode (page 35), then press the [REC] button.
The [REC] button lamp lights, and the User Song number for recording will be
selected automatically.
Performance parts are as follows:
Tracks [9]–[16] will be set for Style playback and the Record Ready mode is
enabled automatically.
Recording track
Track 1
Track 2
Track 3
Tracks 9–16
To cancel recording, press the [REC] button or [EXIT] button. (The [REC] but-
ton lamp turns off.)
40
Owner's Manual
the [REC] button. This method automatically sets tracks 1–
3 as melody parts and tracks 9–16 as Style parts. This is
especially convenient and easy when recording a new Song.
then start recording (page 41). This is useful when you want
to record data to each track independently, one by one.
Part recorded to each track
Main Voice performance
Left Voice performance
Dual Voice performance
Style playback with chord/section changes
User Song
Recording track
NOTE
• Up to approximately 30,000
notes can be recorded, if
you record only to the mel-
ody tracks.
NOTICE
• If all User Songs contain
recorded data, User Song
001 will automatically be
selected. If you record your
performance to a Song that
contains data, the previous
data will be erased by the
new data.
NOTE
• You can manually select the
recorded user Song num-
ber if you select it before
pressing the [REC] button.