Backup Parameters And Initialization; Backup Parameters; Initialization - Yamaha PSR-E433 Owner's Manual

Backup Parameters and Initialization

Backup Parameters

The following data will be maintained even if the
power is turned off and can be transferred then saved
to a computer via Musicsoft Downloader as a single
Backup file. For instructions, refer to "Computer-
related Operations" (page 9).
• User Song data (page 28)
• Style data transferred from a computer and loaded to
Style numbers 187–191 (page 57)
• Registration Memory data (page 31)
• Function Settings (page 48):
Tuning, Split Point, Touch Sensitivity, Style Vol-
ume, Song Volume, Pattern Volume, Metronome
Volume, Grade, Demo Group, Demo Play, Demo
Cancel, Master EQ type, Your Tempo on/off,
Auto Power Off setting, Battery Select, Language
In addition to the Backup data above, all the Style data
(including data that have not been loaded) and all the
Song data will be maintained even if you turn off the
power.
To initialize Backup data, execute "Backup Clear"
explained below.
To initialize data (excluding Backup data) transferred
from a computer, execute "Flash Clear" explained
below.
32
PSR-E433 Owner's Manual

Initialization

This function erases the Backup data described above
and Song/Style data, then restores all the default fac-
tory settings. As required, execute one of the follow-
ing two procedures.
Backup Clear
This operation initializes the backup data.
While holding down the highest white key on the key-
board, press the [ ] (Standby/On) switch to turn the
power on.
Flash Clear
This operation deletes all the Songs and Styles that
have been transferred from a computer. Note that
Style data loaded to Style numbers 187–191 will be
maintained.
While simultaneously holding the highest white key
and the three highest black keys, press the [
(Standby/On) switch to turn the power on.
NOTICE
• Keep in mind that this operation also deletes the data you
have purchased. Be sure to save the important data to a
computer via Musicsoft Downloader (MSD) software. For
details, refer to "Computer-related Operations" (page 9).
]