Craftsman 247.29922 Operator's Manual page 8

IMPORTANT: T his unit isshippedwithoutgasolineor oil inthe engine.
Be certain to serviceenginewithgasolineand oil as instructed in the
Operationsectionof this manualbeforeoperatingyourmachine.
NOTE:Referenceto rightand left hand sideof the Tillerisobserved
fromthe operatingposition.
OPENING CARTON
1. Cut eachcornerof the cartonverticallyfromtop to bottom.
2. Removeall looseparts.
3. Removeloosepackingmaterial.
REMOVING UNIT FROM CARTON
1. Use the handlebarto lift and pullthe tiller backwardsto a flat
area.Checkthecarton thoroughlyfor looseparts.
2. Be sure notto kinkthe forwardclutchcable.
LOOSE PARTS IN CARTON
• HandlebarAssembly
• Tiller
• EngineOil
• Operator'sManual
• DepthGage Assembly
ATTACHING THE CABLE
1. Identifythe forwardclutchcable. See Figure1.
2. Hookthe "Z" end of the forwardclutchcable(A) intothe forward
fineengagementlever.See Figure2.
NOTE:Be sure notto kink the cablewhileattaching.
/
/
/
Forward Clutch
Cable
f
Figure2
J
f
Figure3
ATTACHING THE HANDLE ASSEMBLY
1. Removethe hexbolt and cuppedwasherfrom the rightside of the
frame.Holdthe cableguide bracketon the left sideof frameas it
will fall whenthe boltis removed.Step 1 in Figure3.
2. Insertthe handle intothe tillerframe.Step2 in Figure3.
3. Insertthe bolt throughthe cuppedwasher,frame,handleand into
the cableguide bracket(notethe notch in the cableguide bracket
goes overtheflangeon theframe.)Step3 in Figure3.
J
Figure1
8