Epson P-3000 Product Support Bulletin page 9

New firmware release version 01.33 for multimedia storage viewers

Hide thumbs Also See for P-3000:

When you see the firmware update screen (see reference image below), release the

OK and

keys.

firmware process again.

During the update process, the message screen will display the current firmware and

updated firmware versions. Then the message "Updating Resources" will appear.

Important:

Do not remove the battery or disconnect the AC adapter during the

firmware update process.

6. The firmware update process is completed when you see this screen (see image

below).

7. Power off the unit and remove the CompactFlash or SD memory card.

8. Power on the viewer and verify the new firmware version. It should say 01.20.01.01

(see image below).

Note:

If you do not see this screen, power off the unit and start the

Page 3 of 4

PSB.2008.01.001B

P-5000