Cycle Guide - Kenmore 6002 Use & Care Manual

CYCLE GUIDE - AUTO DRY CYCLES
Not all cycles and settings are available on all modeJs. Settings and options shown in bold are default settings for that cycle.
AUTO DRY
= Senses moisture in the load or air temperature and shuts off: when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.
tem, todry: Dry Dry.e,S Available
Temp: Level: Options:
Jeans, heavy work
clothes, towels
Hkjh Cotton
Work clothes, medium Medium Casual
weight fabrics, sheets
Low Delicates
Casual, shirts, pants,
lightweight items,
synthetics, deiicates,
athietic wear
More
Normal
Less
More
Normai
Less
More
Normal
Less
Wrinkle Guard
TM
Signal
Dry Temp
Wrinkle Guard
TM
Signal
Dry Temp
Wrinkle Guard
TM
Signal
Dry Temp
Automatic cycles give the best drying in the
shortest time. Drying time varies based on fabric
type, load size, and dryness setting.
Select a drying temperature based on the fabrics
in your load. Jf you are unsure of the temperature
to select for a load, select the lower setting rather
than the higher setting.
NOTE:
If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like, select Less next
time you dry a similar load.
CYCLE GUIDE - TiME DRY CYCLES
Not all cycles and settings are available on all models.
TiME DRY
- Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob
or be a separate control.
Itemsto dw:
• - Options: _
Any load Time Dry Any Dry Temp Select a drying temperature based on the
Time Adjustment fabrics in your load. Jf you are unsure of the
Air Only
No heat (Air Only)
Time Adjustment
Rubber, plastic, heat
sensitive fabrics
Any load Touch up Any N/A
Jeans, heavy work Time Dry High N/A
clothes, towels
temperature to select for a load, select the
lower setting rather than the higher setting.
Use a no heat (Air Only) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
This is the last step in a cycle that uses
heat. The load is cooled slowly to reduce
wrinkling and make it easier to handle.
Use this cycle to smooth wear or packing
wrinkles.
Use high temp cycle on heavy cotton loads.
Setting the Drying Temperature
if your dryer has multiple temp settings:
A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no temp (Air Only) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: if you have questions about drying temperatures for various loads, refer to the care label directions.