Help turn the valve handle to the "ON",
Remove the sump for easy filter changes.
THE VALVE HANDLE
button on the wrench will need to be
pushed in and the slide moved up into the wrench
(See Figure 17) to fit on the valve handle.
The valve handle turns clockwise
from the "ON"
the "OFF" and "BYPASS" positions
from the "BYPASS" position
(See Figure 18).
Forcing the valve handle
(See Figure 16).
The valve has a pressure relief valve built in, so there will
be a small amount
out from under the
top cap when the valve is being turned from position
The slide will need to be pushed back into the wrench
to clear the wrench
ring (See Figure 19). Push in
button on the wrench,
and push the slide
back into the wrench handle.
to turn the valve to "BYPASS" or
To remove the sump, turn it to the left (See Figure 14 on
U °utt°n J
toward '*OFF" and '*ON"