Other Settings; Adding Variations To The Sound - Reverb - Yamaha piaggero NP-11 Owner's Manual

Other Settings

Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and expression to the
sound to create a realistic acoustic ambience.
Key Reverb Type
C2 Room
C#2 Hall1
D2 Hall2
D#2 Stage
E2 Off
Selecting a Reverb Type
While holding down the [VARIATION] button, press one of the C2 – E2 keys
to select a reverb type (as shown above).
Adjusting Reverb Depth
While holding down the [VARIATION] button, press one of the C1 – A#1 keys
to adjust the reverb depth for the selected Voice.
The depth value increases as you press higher keys.
While holding down the [VARIATION] button, press the B1 key to set the
reverb to the depth most suitable for the selected Voice.
16
NP-31/NP-11 Owner's Manual
Description
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This
effect sim-ulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
NP-31
NP-11
C1 C2 E2
NP-31
A#1 (10)
NP-11
C1 (0) B1 C2
NOTE
The appropriate Reverb Type and Depth
are automatically set when a Voice is
selected.
NOTE
Setting range:
0 (no effect) – 10 (maximum depth)