Manual paper feed clutch
1.
Open the left side cover. See
2.
Tilt the printer onto its right side, and remove the six screws (A), the screw (B), and the ground cable screw
(C).
3.
Lift the motor end, and disconnect the main motor cable (D).
4.
Lift the main motor drive enough to clear.
Note: The main motor drive does not have to be completely removed. See
page 4-28
for more information.
5.
Use a thin screw driver to remove the clip (E).
6.
Remove the manual paper feed clutch.
"Left side cover removal" on page 4-4
B
A
for more information.
D
C
"Main motor drive removal" on
Repair information
4512-220, -230
4-31