Protocol Control; Http; Tcp/Ip - Xerox 7760DN - Phaser Color Laser Printer Administrator's Manual

Protocol Control

This section includes:
■

HTTP

on page 3-6

TCP/IP

on page 3-6
■
■ Port 9100 on page 3-7
■ LPR on page 3-8
IPP on page 3-8
■
■ SNMP on page 3-9
■ Email Server on page 3-9
■ MaiLinX Remote Printing
■ MaiLinX Alerts on page 3-11
See also:
Discovery Protocols
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you want to
use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical
Support at www.xerox.com/office/support.
See also:
About HTTP, HTTPS, and SSL/TLS
TCP/IP
To change TCP/IP settings:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the Protocols folder on the left sidebar.
5.
Select TCP/IP.
6.
If prompted, enter your Admin or Key User name and password.
7.
In the BOOTP/DHCP box, select one of the following:
■ On: The printer issues BOOTP and DHCP requests on startup.
■ Off: The printer does not issue BOOTP or DHCP requests on startup.
on page 3-10
on page 2-5
on page 4-3
System Administrator Guide
3-6

Protocol Control