Download  Print this page

Setting And Starting A Washing Programme - Electrolux ESF2450 User Manual

Hide thumbs

Advertisement

10 electrolux
Programme
1) For programmes where the option has an impact, the energy saving is between 10% and 25%.
2) During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy
the water is. The programme duration, water and energy consumption levels can vary; this depends
upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The
temperature of the water is automatically adjusted between 45°C and 70°C.
3) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme
1) The digital display shows the programme duration.
The pressure and temperature of the
water, the variations of power supply

Setting and starting a washing programme

Set the washing programme with the
door ajar. The washing programme only
starts after you close the door. Until then
it is possible to modify the settings.
Do these steps to set and start a washing
programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Press one of the programme buttons.
Refer to the chapter 'Washing pro-
grammes'.
– The programme indicator light comes
on.
– All other programme indicator lights go
off.
– The digital display shows in flashing the
programme duration.
– The phase indicator light for the wash-
ing programme starts to flash.
4. Close the door.
Degree
Type of
of soil
load
Normal
Crockery
or light
and cut-
soil
lery
Programme duration
(in minutes)
1)
-
-
-
-
Programme description
Main wash up to 50°C
1 intermediate rinse
Final rinse
Energy consumption
(in kWh)
1,0
0,5-0,8
0,63
0,45
and the quantity of dishes can change
these values.
– The washing programme starts auto-
matically.
– The phase indicator light for the wash-
ing programme is on.
When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a
washing programme if necessary.
Caution! Open the door carefully. Hot
steam can come free.
Cancelling a washing programme
1. Press and hold function buttons B and C
until all the programme lights come on.
2. Release function buttons B and C to can-
cel the washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Energy
Save op-
1)
tion
Selectable,
no impact
on washing
pro-
gramme.
Water consumption
(in litres)
9,0
5,0-9,0
7,0
6,0

Hide quick links:

Advertisement

loading