The Programme Does Not Start - Electrolux ESF 45010 User Manual

Malfunction

The programme does not start

Once these checks have been carried
out switch on the appliance.
The programme will continue from the
point at which it was interrupted.
If the malfunction or fault code
reappears contact the Service Force
Centre.
For other fault codes not described in
the above chart, please contact your
Service Force Centre.
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
something not working electrolux 31
Possible cause and solution
The dishwasher's door has not been
properly closed.
Close the door.
The main plug is not plugged in.
Insert the main plug.
The fuse has blown out in the household
fuse box.
Replace the fuse.
Delay start has been set.
If dishes are to be washed immediately,
cancel the delay start.