Buttons And Display; Vacuuming Programmes - Electrolux TRILOBITE Manual

Hide thumbs Also See for TRILOBITE:
Table of Contents

Advertisement

Buttons and Display

Stop
Next
On/Off
Press the On/Off button for about one second to start and
stop Trilobite.
Stop
The Stop button has two functions. Use it to cancel a command
or to stop Trilobite during vacuuming.
Yes
Press the Yes button to confirm a setting shown on the display.
Next
Use the Next button to select items on the menu. Also use the
Next button as a "No" button when you do not want to select a
setting presented in the display.
26
Dust collector full
Charger Found indicator
Battery indicator
On/Off
Current
Yes
vacuum
programme
Message display
Symbols
Information is shown in the display using status messages and
also by symbols.
(The battery capacity symbol is shown on page 24.)
Normal
Quick
Spot
vacuuming
vacuuming
vacuuming
Battery
Charger found
Dust
collector full

Vacuuming Programmes

Remaining time
Clocksymbol
Normal. Timer: Auto
Select programme?
Normal vacuuming
When you start Trilobite it is ready to
start vacuuming using the Normal pro-
gramme and automatic time calculation.
1. (When Trilobite is switched off and on the
floor or placed in the charger), press
start.
2. Press
to start vacuuming.
3. If you want to select another programme,
press
.
4. If you would like to change the vacuuming
programme, press
vacuuming" or "Spot vacuuming").
5. If instead you would like to change the
Timer
time setting (this may be necessary when
vacuuming floor surfaces of 40 m
more), press
again and confirm by
pressing
.
6. Use
to display "On" and then confirm
by pressing
.
7. Set the desired time by pressing
then confirm with
8. Press
to commence vacuuming.
NOTE! Never start Normal vacuuming at
Clocksymbol
distances under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
pressing
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
Quick. Timer: 10min
Select programme?
Quick vacuuming
The Quick programme is identical with
Normal vacuuming except that wall
mapping is not included.Vacuuming
takes shorter time with the duration
preset to 10 minutes, however, the
to
vacuum result may be slightly inferior.
1. After you have switched on Trilobite, press
to change the programme and confirm
by pressing
.
(continue to "Quick
2. Use
until "Quick" is displayed and
confirm by pressing
.
3. If you don't want to change the time
setting, put Trilobite on the floor and start
2
vacuuming by pressing
.
or
4. If instead you would like to change the
time setting, press
until "On" is
displayed and confirm by pressing
5. Set the desired time by pressing
and
then confirm with
.
.
6. Put Trilobite on the floor and start
vacuuming by pressing
.
NOTE! Vacuuming can always be interrup-
ted by pressing
. After this, pressing
recommences vacuuming, while
pressing
will call up the menu.
Spot
Select programme?
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, e.g. if you have spilled
something.The area to be vacuumed is
approx. 1 m
with Trilobite placed in the
2
centre of the area.The area is vacuumed
twice.
1. Switch on Trilobite, press
to change
the programme and confirm by pressing
.
2. Use
until "Spot" is displayed and
confirm by pressing
.
3. Put Trilobite in the centre of the area to
be vacuumed and start vacuuming by
pressing
.
Do not under any circumstances
.
vacuum liquids or lit or glowing objects, e.g.
and
cigarette butts.
NOTE! Vacuuming can always be interrup-
ted by pressing
. After this, pressing
recommences vacuuming, while
pressing
will call up the menu.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents