GB
Exchanging the dust bag
IMAGE 4:
•
Remove the tube by turning it counter clockwise
•
Remove the full dust bag and seal the opening with
the built in seal on the plate
•
Insert a new dust bag and check the filter
If the air filter need cleaning
IMAGE 5:
Loosen the filter container from the lid, remove the
filter positioned inside the lid and clean it under warm,
running water. Then, let it dry. Make sure the filter
container is positioned the correct way at reassembly.
Motor filter
IMAGE 6:
The filter protects the motor if the dust bag has broken
for some reason. If the dust bag has broken and/or
the filter has been clogged, it needs to be cleaned
immediately. Remove the filter and clean it under warm,
running water. Never use the vacuum cleaner without
the filter in its position.
NOTE! The filters need to be absolutely dry before
they are reinserted. If the filters are damaged in any
way, they must be replaced. Do not use the vacuum
without these filters.
IMAGE 7: HEPA-filters are available as extra
accessories. When a HEPA-filter is used it is replaced
instead of the air filter positioned inside the lid.
NOTE! The vacuum cleaner is equipped with an
overheating protection. If it is triggered, turn the
machine off and remove the electric cord. Refer to
troubleshooting.
10