Download  Print this page

Replacing Bulbs - Ducati SUPERSPORT800 Owner's Manual

Hide thumbs

Advertisement

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the
new bulb complies with voltage and wattage as specified
on page 74, "Electric System", for that lighting device.
Always test the new lamp before refitting the parts you
have removed.
Headlamp
To gain access to headlamp bulbs you will need to work
behind the headlamp fairing.
E
Remove connector (1, fig. 54) from the bulb.
Pull the tab (A) to remove the protective cap.
Release the clip (2, fig. 55) that holds the bulb in place
and take the bulb out of its socket. Fit a new bulb.
Note
Be careful to hold the new bulb at the base only.
Never touch the transparent body with your fingers or it
will blacken resulting in reduced bulb brilliancy.
56
A
1
2
fig. 54
fig. 55

Advertisement

Table of Contents

This manual is also suitable for:

800sportSupersport1000Supersport 800Supersport 1000

Comments to this Manuals

Symbols: 0
Latest comments: