Table of Contents
Advertisement
Installing KX-DT301/KX-NT303
Installing KX-DT301/KX-NT303
CAUTION:
• To prevent damage to the telephone, be sure to unplug the
extension line before you set up or remove the KX-DT301 (USB
Module) or the KX-NT303 (Add-on 12 Key Module).
• Connect the KX-NT303 first when installing both the KX-DT301
and the KX-NT303.
KX-NT303
The Add-on 12 Key Module allows 12
additional flexible buttons to be added to this
unit. These buttons are used to seize an
outside line, make a call using One-touch
Dialling, or perform a feature that has been
assigned to the key.
1. Open the cover.
3. Plug the flat cable into the
connector (A), then bend the
cable slightly as shown (B).
14
<with a KX-DT346>
2. Attach the KX-NT303 to your
unit with the screws (included
with KX-NT303).
4. Close the cover.
Hide quick links:
Advertisement
Table of Contents
