Connecting Antennas; Using External Antennas - Pioneer VSX-523-K Operating Instructions Manual

2
2

Connecting antennas

Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see

Using external antennas

below).
fig. a
ANTENNA
AM LOOP
4
FM UNBAL
75
1
Push open the tabs, then insert one wire fully into each
terminal, then release the tabs to secure the AM antenna
wires.
2
Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3
Place the AM antenna on a flat surface and in a direction
giving the best reception.
4
Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
fig. b
Using external antennas
To improve FM reception
Use an F connector (not supplied) to connect an external FM
antenna.
2
FM UNBAL
75
3
1
To improve AM reception
Connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated
wire to the AM antenna terminal without disconnecting the
supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
Indoor antenna
(vinyl-coated wire)
F connector
16
Connecting your equipment
ANTENNA
Outdoor
antenna
AM LOOP
5 m to 6 m
(16 ft. to 20 ft.)
4
6
34