Before Using Synchronization; About Synchronized Operations; Cautions On The Control With Hdmi Function - Pioneer Elite VSX-43 Operating Instructions Manual

9
9
• LAST – The HDMI input signal selected previously will
be output.
• BD, DVD, SAT/CBL, DVR/BDR, HDMI/MHL, GAME –
The HDMI input signal selected here will be output.
• OFF – Signal will not be output during standby.
- If the Standby Through setting is not set to OFF, the
power consumption during standby will increase.
8
When you're finished, press RETURN.
You return to the Home Menu.

Before using synchronization

Once you have finished all connections and settings, you
must:
1
Put all components into standby mode.
2
Turn the power on for all components, with the power
for the TV being turned on last.
3
Choose the HDMI input to which the TV is connected to
this receiver, and see if video output from connected
components displays properly on the screen or not.
4
Check whether the components connected to all HDMI
inputs are properly displayed.

About synchronized operations

The Control with HDMI-compatible component connected to
the receiver operates in sync as described below.
• Synchronized amp mode
- From the menu screen of the Control with HDMI-
compatible TV, set audio to be played through this
receiver, and the receiver will switch to the synchronized
amp mode.
When in the synchronized amp mode, the synchronized
-
amp mode is canceled when the receiver's power is
turned off. To turn the synchronized amp mode back on,
set audio to be played through the receiver from the TV's
menu screen, etc. This receiver will power up and switch
to the synchronized amp mode.
When in the synchronized amp mode, the synchronized
-
amp mode is canceled if an operation that produces
sound from the TV is performed from the TV's menu
screen, etc.
When the synchronized amp mode is canceled, the
-
receiver's power turns off if you were viewing an HDMI
input or a TV program on the TV.
• Power synchronization with TV
When the TV's power is set to standby, the receiver's
-
power is also set to standby. (Only when the input for a
component connected to the receiver by HDMI
connection is selected or when watching the TV.)
• Automatic switching of inputs
The receiver's input switches automatically when the
-
Control with HDMI-compatible component is played.
The receiver's input switches automatically when the
-
TV's input is switched.
The synchronized amp mode remains in effect even if the
-
receiver's input is switched to a component other than
one connected by HDMI.

Cautions on the Control with HDMI function

• Connect the TV and components (Blu-ray Disc player, etc.)
directly to this receiver. Interrupting a direct connection
with other amps or an AV converter (such as an HDMI
switch) can cause operational errors.
• When the receiver's Control is turned ON, even if the
receiver's power is in the standby mode, it is possible to
output the audio and video signals from a player via HDMI
to the TV without producing sound from the receiver, but
only when a Control with HDMI-compatible component
(Blu-ray Disc player, etc.) and compatible TV are
connected. In this case, the receiver's power turns on and
the power and HDMI indicators light.
56
Control with HDMI function
4
7
62