Installing The Battery - Smart Technologies AirLiner WS100 Installation And User Manual

To enable the wireless connection
If you want to install the included Bluetooth USB adapter, or if you want to purchase and install a
commercially available USB-to-Bluetooth wireless adapter, install the adapter's driver software
according to the instructions that came with the adapter.
IMPORTANT
If you want to use a computer with built-in Bluetooth wireless support, enable the support. For
more information, see the instructions that came with your computer.

Installing the Battery

Before you can use the slate, you must install the rechargeable battery (included).
WARNING
WARNING
To install the battery
1. Place the AirLiner slate upside down on a flat surface.
2. Slide open the battery compartment door.
6
• Remove previous versions of Bluetooth software before you install the software
included with your Bluetooth USB adapter.
• Do not insert the Bluetooth USB adapter into a USB port until your Bluetooth
software asks you to do so during the installation.
• Close any Found New Hardware wizards that appear during the installation
(Windows® operating systems only).
Do not install a battery other than the one included with your AirLiner slate. Any
other type of battery can damage the slate, start a fire or cause personal injury.
If you drop the battery on a hard surface, replace the battery, even if there is no
apparent damage. It may be damaged internally. Replacing the battery prevents
potential damage to the slate that can occur if a damaged battery leaks after you
install it.
Battery Compartment Door
Installing the Slate
Battery
Battery Compartment
99-00666-20 B0