Extending The Usb With A Cat5-Xt-1100 (Active) Extender; Using A Cat5-Xt-1100 Extender - Smart Technologies SMART Board 800 Series User Manual

C H A P T E R 2
Extending the USB of SMART Board 800i series interactive whiteboard systems
Extending the USB with a
CAT5-XT-1100 (active) extender
You can use the CAT5-XT-1100 extender to replace the 16' (5 m) USB A to mini-B cable included with
your interactive whiteboard.
I M P O R T A N T
Connect your USB cables or extenders to the USB1
ECP module. Do not use the USB2
N O T E S
You can connect the USB cable or extender to the SMART Board 800 series interactive
l
whiteboard system's ECP module using the included USB A to mini B cable or using a
standard USB cable with the mini-USB to USB adaptor included with your system.
SMART Board 800 series interactive whiteboard systems have a USB hub integrated into
l
the ECP module and are therefore compound devices. See USB topology on page 17.

Using a CAT5-XT-1100 extender

Computer
N O T E S
The maximum Cat 5 cable length in this configuration is 92' (28 m) (not included).
l
You can use plenum-rated Cat 5 cable, if required.
l
The computer's USB interface must provide sufficient power for the bus-powered
l
CAT 5-XT-1100 extenders. A laptop might not provide sufficient power while running on
battery power.
10
receptacle.
CAT5-XT-1100
Cat 5 cable < 92' (28 m)
receptacle on the interactive whiteboard's
Interactive
USB
whiteboard
adapter
system