Lightolier Concept Elegance Lens Specification

Page 1 of 2
23-3/4"
23-3/4"
(603mm)
(603mm)
2-11/16"
2-11/16"
(68mm)
(68mm)
11-7/16"
11-7/16"
(291mm)
(291mm) (2) Ø7/8 " K.O.
(22mm)
24"
24"
(610mm)
(610mm)
Ordering information
QCE 2
Quality Luminaire
Visual Width
Recessed direct 2' G = Fits
indirect soft light
optical system
Features
• Efficiencies up to 78.1%
• Seamless welded form: curved top and side reflectors are formed together without
any gaps or visual barriers
• Shallow design, only 3-5/8" deep for easy installation in shallow plenum
• Painted after fabrication (PAF) luminaire
• New high performance contoured lens conceals lamp image providing balance
between reflected and direct light
• Enclosed and sealed lens suited to most commercial, hospital and institutional
applications. Prevents light leaks. Ideal for use in high dust/germ environments
(not suitable for clean room applications and other locations requiring specially
approved luminaires)
• No tools required to remove lens for easy relamping and maintenance
• Fully recessed luminaire and lamp compartment
• 95% Reflective Alter soft white paint finish
• One-piece body for easy installation
• Easy access to ballast through lamp compartment
• Can be row mounted
• Fits standard 15/16" T-Grid, Slot T-Grid or drywall ceilings
Material
One piece chassis constructed from die formed 20 gauge cold rolled steel.
Reflectors - 95% reflectance baked white acrylic matte paint finish.
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • QCE2x2OLOP.pdf
Lightolier is a Philips group brand
Ceiling compatibility for G type luminaire
23-3/4"
23-3/4"
(603mm)
(603mm)
(2) Ø7/8 " K.O.
(22mm)
3-5/8"
3-5/8"
(92mm)
(92mm)
G OL OP
Ceiling Lamp
Type Shield
OL = Contoured
standard Soft
15/16" White
T-grid Opal Lens
or Slot
T-grid
ceilings
Lamp Shield Details
OP = One piece (no center slot) lamp shield
www.lightolier.com
Alter Concept Elegance Lens
Suited to
standard
exposed
15/16"
T-grid
ceilings
Suited to
standard
exposed
Slot T-grid
ceilings
Lamp Lamp Voltage
Quantity
1 = 1 Lamp 24 = 24WT5HO uNv T5/T5HO
(FT only) PG = Electronic Linear T5/T5HO
FT = TT5 Bi-Tube 347
2 = 2 Lamp
TT5
PR = 40W Electronic TT5
BE = 50W Electronic TT5 Rapid
BF = 55W Electronic TT5 Rapid
DA = Electronic TT5, T5, T5HO,
For Dimming Ballast
Suffix, please consult your
Lightolier Representative.
Finish
Chassis exterior - phosphate undercoating, baked white acrylic matte high reflectance
paint finish.
Electrical
Thermally protected class "P" ballast. If K.Os are within 3" of ballast use wire suitable
for at least 90C. Suitable for damp location.
Labels
Listed by cCSAus.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Canlyte
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
2' x 2' direct/indirect recessed fluorescent
Ballast Options
Type
F = Internal Fusing (Canada)
GLR = Internal Fusing (uSA)
Program Start (<10% THD)
FK92X2 = Drywall Kit for plaster
frames
EM* = TT5/T5/T5HO Emergency
Programmed Rapid Start
Lighting System (uSA)
(<10% THD)
O* = TT5 Emergency Lighting
System (Canada)
Start (<20% THD)
E* = T5/T5HO Emergency Lighting
System (Canada)
Start (<10% THD)
QvS-HD = Alter Hold Down Clips
(Std 15/16" only)
Program Start
(<10% THD) Dali Digital * All 2' x 2' luminaire using
Addressable Dimming Emergency Lighting System
are 5-1/2" deep
Type:
www.canlyte.com