Channel List - Emerson LC321EM9 Owner's Manual

O
PTIONAL SETTING
Note:
• After setting "Auto Channel Scan", using [CH K / L] on the
remote control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER] or [SETUP] during auto channel
scan, the setting will be canceled.
• Channel settings will be saved even if the power fails.
• Even if "Autoscan" is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing [POWER].
18
EN

Channel List

The channels selected here can be skipped when selecting the channels
using [CH K / L ].
Those channels can still be selected with [the Number buttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Channel List", then press
[ENTER].
4
Use [Cursor K / L] to select the channel you want to
skip, then press [ENTER].
• The selected channel darkens in the channel list,
and it skips when selecting the channels by using
[CH K / L].
• To re-register the skipping channels, use [Cursor K / L]
and press [ENTER]. The registered channels will be gray
in the channel list, and you can select those channels
by using [CH K / L] again.
• When you skip a major channel, its minor channels
are skipped as well.
Note:
• The channel with "DTV" indicated on the display is ATSC.
Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
Channel List Channel List
Highlight channels for Ch
DTV DTV 6 6
Up/Down key selection.
27
DTV DTV 8 8
9 9
DTV 48
DTV 48
58
58
DTV 67
BACK
Ch Select Watch/Skip Back
ENTER