Download Print this page

Advertisement

Quick Links

4-457-821-01(1)
Interchangeable Lens
Objectif interchangeable
Operating Instructions
Mode d'emploi
Manual de instrucciones
E 20mm F2.8
E-mount
©2013 Sony Corporation
SEL20F28
Printed in Thailand
2
4
1
3
 –1
(1)
(2)
 –2
E
A
ˎ
ˎ
1
ˎ
ˎ
ˎ
ˎ
2
1
2
3
*
4
*
1
ˎ
ˎ
1
2
2
2
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
ˎ
3
DMF
E20mm F2.8
(SEL20F28)
35mm
*
30
1
mm
6-6
*
1
70°
*
m
2
0.2
0.12
f/16
mm
49
E20mm F2.8
(SEL20F28)
62.6 × 20.4
mm
g
69
*
35mm
APS-C
1
*
2
ˎ
ˎ
1
1
1
* 1
*
This instruction manual explains how to use lenses.
Precautions common to all lenses such as notes on use
are found in the separate "Precautions before using". Be
sure to read both documents before using your lens.
This lens is designed for Sony α camera system E-mount
cameras. You cannot use it on A-mount cameras.
Notes on Use
When carrying a camera with the lens attached, always firmly
ˎ
ˎ
hold both the camera and the lens.
Precautions on using a flash
When using a flash, shoot at least 1m (3.3 feet) away from
ˎ
ˎ
your subject. With certain combinations of lens and flash, the
lens may partially block the light of the flash, resulting in a
shadow at the bottom of the picture.
Vignetting
When using the lens, the corners of the screen become darker
ˎ
ˎ
than the center. To reduce this phenomena (called vignetting),
close the aperture by 1 to 2 stops.

 Identifying the Parts

1 Lens hood index
2 Focusing ring
3 Lens contacts*
4 Mounting index
* Do not touch the lens contacts.
 Attaching and Detaching the Lens
To attach the lens
(See illustration  –  .)
1
Remove the rear and front lens caps and the
camera body cap.
You can attach/detach the front lens cap in two ways, (1)
ˎ
ˎ
and (2).
2
Align the white index on the lens barrel with
the white index on the camera (mounting
index), then insert the lens into the camera
mount and rotate it clockwise until it locks.
ˎ
ˎ
Do not press the lens release button on the camera when
mounting the lens.
ˎ
ˎ
Do not mount the lens at an angle.
To remove the lens
(See illustration  –  .)
While holding down the lens release button on
the camera, rotate the lens counterclockwise
until it stops, then detach the lens.
 Attaching the Lens Hood (supplied)
It is recommended that you use a lens hood to reduce flare
and ensure maximum image quality.
Align the red line on the lens hood with the
red line on the lens (hood index), then insert
the lens hood into the lens mount and rotate it
clockwise until the red point on the lens hood
is aligned with the red line on the lens (hood
index) and the lens hood clicks into place.
When using a built-in camera flash or a flash supplied with the
ˎ
ˎ
camera, remove the lens hood to avoid blocking the flash light.
You can attach a filter or front lens cap to the lens hood as
ˎ
ˎ
well.
Depending on the filter you use, you can attach the lens hood
ˎ
ˎ
after attaching the filter to the lens.
 Focusing
There are three ways to focus.
Auto focus
ˎ
ˎ
The camera focuses automatically.
DMF (Direct manual focus)
ˎ
ˎ
After the camera focuses in auto focus, you can make a fine
adjustment manually.
Manual focus
ˎ
ˎ
You focus manually.
For details on mode settings, refer to the instruction manual
supplied with the camera.

Specifications

Product name
E20mm F2.8
(Model name)
(SEL20F28)
Equivalent 35mm-format
30
focal length*
1
(mm)
Lens groups-elements
6-6
70°
Angle of view*
1
Minimum focus*
(m (feet))
0.2 (0.66)
2
0.12
Maximum magnification (X)
Minimum f-stop
f/16
49
Filter diameter (mm)
Dimensions (maximum
62.6 × 20.4
(2 1/2 × 13/16)
diameter × height)
(approx., mm (in.))
69 (2.4)
Mass (approx., g (oz))
*
1
The values shown above for equivalent 35mm-format
focal length and angle of view are for Interchangeable Lens
Cameras equipped with an APS-C sized image sensor.
*
Minimum focus is the shortest distance from the image
2
sensor to the subject.
Depending on the lens mechanism, the focal length may
ˎ
ˎ
change with any change in shooting distance. The focal
lengths given above assume the lens is focused at infinity.
Included items
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood* (1), Set of printed documentation
* It is attached to the lens on shipment.
Design and specifications are subject to change without
notice.
is a trademark of Sony Corporation.
Cette notice explique comment se servir des objectifs.
Les précautions communes à tous les objectifs, par
exemple les remarques sur l'emploi, se trouvent sur la
feuille « Précautions avant toute utilisation ». Veuillez
lire les deux documents avant d'utiliser votre objectif.
Votre objectif est conçu pour les appareils photo à monture
E de type Sony α. Il ne peut pas être utilisé pour les appareils
photo à monture A.
Remarques sur l'emploi
ˎ
ˎ
Lorsque vous portez un appareil photo avec l'objectif dessus,
tenez toujours fermement l'appareil photo et l'objectif.
Précautions concernant l'emploi d'un flash
ˎ
ˎ
Si vous utilisez un flash, prenez la photo à au moins 1 m (3,3
pieds) du sujet. Associé à certains types de flash, l'objectif
peut bloquer partiellement la lumière du flash et produire un
ombre au bas de l'image.
Vignetage
Lorsque l'objectif est utilisé, les coins de l'écran deviennent
ˎ
ˎ
plus sombres que le centre. Pour réduire ce phénomène
(appelé vignetage), fermez l'ouverture de 1 ou 2 crans.
 Identification des éléments
1 Repère de parasoleil
2 Bague de mise au point
3 Contacts d'objectif*
4 Repère de montage
* Ne touchez pas les contacts d'objectif.
 Pose et dépose de l'objectif
Pour poser l'objectif
(Voir l'illustration –.)
1
Déposez les capuchons d'objectif avant et
arrière et le capuchon de l'appareil photo.
ˎ
ˎ
Vous pouvez poser et déposer les capuchons d'objectif
avant de deux façons, (1) et (2).
2
Alignez le repère blanc du barillet d'objectif
sur le repère blanc de l'appareil photo
(repère de montage), puis posez l'objectif
sur la monture de l'appareil photo et
tournez-le dans le sens horaire de sorte qu'il
s'encliquette.
N'appuyez pas sur le bouton de libération de l'objectif sur
ˎ
ˎ
l'appareil photo lorsque vous posez l'objectif.
Ne posez pas l'objectif de biais.
ˎ
ˎ
Pour déposer l'objectif
(Voir l'illustration –.)
Tout en appuyant sur le bouton de libération de
l'objectif sur l'appareil photo, tournez l'objectif
dans le sens antihoraire jusqu'à l'arrêt, puis
déposez l'objectif.
 Fixation du parasoleil (fourni)
Il est conseillé d'utiliser un parasoleil pour réduire la
lumière parasite et obtenir la meilleure image possible.
Alignez la ligne rouge du parasoleil sur la ligne
rouge de l'objectif (repère de parasoleil), puis
insérez le parasoleil sur la monture d'objectif et
tournez-le dans le sens horaire jusqu'à ce que
le point rouge du parasoleil s'aligne sur la ligne
rouge de l'objectif (repère de parasoleil) et que
le parasoleil s'encliquette.
Lorsque vous utilisez le flash intégré d'un appareil photo ou le
ˎ
ˎ
flash fourni avec un appareil photo, retirez le parasoleil pour
éviter de bloquer la lumière du flash.
Vous pouvez aussi poser un filtre ou un capuchon d'objectif
ˎ
ˎ
avant sur le parasoleil.
ˎ
ˎ
Avec certains filtres, vous pouvez fixer le parasoleil après avoir
mis le filtre sur l'objectif.
(Suite à la page arrière)

Advertisement

loading

Summary of Contents for Sony SEL20F28

  • Page 1: Specifications

    Votre objectif est conçu pour les appareils photo à monture Precautions on using a flash E de type Sony α. Il ne peut pas être utilisé pour les appareils When using a flash, shoot at least 1m (3.3 feet) away from ˎ...
  • Page 2 Elementos incluidos Este objetivo está diseñado para cámaras con montura E Objetivo (1), Tapa frontal del objetivo (1), del sistema de cámaras α de Sony. No podrá utilizarse con Tapa posterior del objetivo (1), Parasol* (1), cámaras con montura A.