Installing A Vesa Wall Mount Or Desk Mount - Samsung SyncMaster VC240 User Manual

2-4

Installing a VESA Wall Mount or Desk Mount

This product has a 100 mm x 100 mm / 200 mm x 100 mm VESA compatible stand mount.
A. Stand Mount
B. Stand (Optional)
To attach a VESA compatible wall mount, follow these steps:
1. Turn the product off, and the unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down on the cloth or cushion.
3. Detach the rear cover.
4. Remove the stand as described previously.
5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
• If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
• Do not use screws that are incompatible with the standard VESA specifications and do not screw them in using
excessive force.
This may result in damage to the product or injury due to the product falling.
The company shall not be held liable for any damage or injury.
• Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible
with the specified specifications or due to an installation not performed by an authorized installation engineer.
• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of clearance from
the wall.
• Samsung shall not be held liable for any problems caused by using a stand that is not compatible with the specified
specifications.
• Use the wall mount according to the specifications of your country.
Installing the Product
A B
2-4