Removing The Stand - Samsung SyncMaster VC240 User Manual

2-3

Removing the Stand

Before removing the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the
screen is facing downwards.
Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage,
place the monitor down gently and carefully.
A
2-3
Place a soft cloth over a table to protect the product, and then place the product onto
the cloth so that the front of the product is facing downwards.
Hold the product's stand as shown in the picture, and then detach the rear cover.
Unfasten the screws indicated as "
The stand can be detached after removing the screws.
Hold the main body of the product as shown in the picture.
Lift and separate the unscrewed stand.
."
Installing the Product