While in standby mode, you can continuously store, and subsequently record, up
to 7 seconds in DVCPRO or 3 seconds in DVCPRO HD of video and audio. In
effect, this lets you record footage of events that occur even before you press the
rec start button, giving you a way to "go back" and capture moments you otherwise
would have missed.
Clip Thumbnail/Data Function
The AG-HVX200 records each cut as a
clip (file) and automatically attaches a
thumbnail image and file information to it. To
preview a clip on the LCD monitor or to
check clip data, simply choose the clip you
want from the list of thumbnails. The
thumbnails and time code information can
also be displayed using nonlinear editing
* Supported by Canopus, EDIUS.
Shot Marker Function
If desired, you can add a simple OK/NG
shot marker to each clip either during or
after recording. When a P2 card containing
marked clips is inserted* in a PC, the PC will
display with an M demarcation in the P2
viewer which of the clips is the one with the
* The P2 card driver (standard equipped) and P2 viewer (available on web at free for users) must be
installed. These softwares operate under Windows XP and Windows 2000.
Convenient for producing animation, this mode records for a set time (from 1
frame to 1 second) each time you press the Start button.
Recording one frame at a time at set intervals (from 2 frames to 10 min), this
mode is useful for monitoring and special ultra-undercranking effects.