Super-Compact, Large Capacity and High Speed
P2, which stands for Professional Plug-in, is a compact solid-state memory card
designed for professional AV use. Basically, four SD Memory Cards are packaged
together to create a single P2 card. When striped as a RAID 0 array, this gives the
P2 four times the transfer speed and four times the capacity of a single SD Memory
Card. A slim, large-capacity 8-GB*
of DVCPRO/DV codec recording yet weighs only about 45 grams. Compliant with
PC Card standards (Type II), the P2 card plugs directly into the card slot of a laptop
AV data on the card mounts instantly, with each recorded as an MXF file. The
data can be used immediately — no digitizing necessary — for nonlinear editing, or
it can be transferred over a network. P2 far surpasses all other AV media in transfer
speed, too. The P2 cards transfer data is up to 640 Mbps*
speed up production processes.
P2 card Recording Time Reference
*1: Total card capacity includes space for data management such as system data; therefore, actual usable
area is less than the capacity indicated on the card.
*2: The P2 card driver (standard equipped) must be installed. The P2 card driver operates under Windows XP
and Windows 2000. The Mac computer may also use the PCMCIA slot to load in P2 data, providing the
correct driver has been installed.
*3: This data transfer speed is a theoretical value. The actual data transfer speed varies according to
operating conditions and other ancillary devices.
*4: Native recording mode. It records only active frames.
P2 card (AJ-P2C008HG) can hold 32 minutes
Approx. Recording Time
, which can greatly