Recording Motion Pictures - Panasonic HM-TA2 Owner's Manual

Recording motion pictures

When in Motion Picture Recording Mode
1
Press the Recording button to start recording.
≥ When you begin recording, ; changes to ¥.
2
Press the Recording button again to pause
recording.
≥ The images recorded between pressing the Recording button to start
recording and pressing it again to pause recording become one scene.
≥ In the following cases, the countdown until the recording is stopped will start from
approx. 30 seconds and the recording will stop when the display reaches 0 second.
j When the total of the capacity of the SD card is about to be used during the recording.
j When the recording time reaches near the maximum continuous
recordable time for a single scene. (l 90)
≥ Please refer to page 90 for details on continuous recordable time for a single scene.
≥ Maximum number of recordable scenes on a single SD card is 899100.
≥ Operation sound may be recorded when you perform touch operation
while recording.
∫ About the screen display when recording motion pictures
: Recording mode
¥:
Recording motion picture
;:
Recording pause
01h30m: Remaining time for motion picture
recording
00m00s: Elapsed recording time
≥ "h" is an abbreviation for hour, "m" for minute
and "s" for second.
About the compatibility of the recorded motion pictures
≥ They are not compatible with devices other than those that support
MP4. Images cannot be played with equipment that does not
support MP4. Confirm that your equipment supports MP4 by
referring to the operating instructions.
≥ There are some cases where the recorded motion pictures cannot
be played back, even if the device supports MP4. In such cases,
play the recorded motion picture with this unit instead.
01h30m 01h30m 01h30m
35
VQT3N87