Inserting/Removing An Sd Card - Panasonic HM-TA2 Owner's Manual

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used
on other equipment, for the first time on this unit, format the SD card.
(l 57) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the status indicator has gone off.
HM-TA2
≥ Insert SD card as shown in the figure.
1
Open the SD card door and insert (remove) the SD
card into (from) the card slot B.
≥ Face the label side C in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
≥
HM-TA20
Open the SD card door after releasing the lock with the LOCK
lever for the SD card door.
2
Securely close the SD card door.
Status indicator A
≥ When this unit is accessing
the SD card, the status
indicator lights up.
29
VQT3N87