Channel List; Navigating The Whole List Of Channels; Deleting Unwanted Channel; Renaming Channels - Hitachi HDB73 Instruction Manual

5.1. CHANNEL LIST

The following operations can be performed in this menu

1. Navigating the whole list of channels

2. Deleting unwanted channels

3. Renaming channels

4. Adding locks to channels

5. Setting the favourite list
Channel Table is where the channels are managed.
5.1.1. NAVIGATING THE WHOLE LIST OF CHANNELS
In the channel table moves the cursor to select the previous or next channel. RED and GREEN buttons
select page up and down.
To watch a specific channel, highlight it using the buttons or the Red/Green buttons, then press SELECT,
if the SELECT box is highlighted. The name and number of the selected channel will be displayed in the top-right
corner of the screen.
If the selected channel is password protected, a pop up menu will be displayed. If the correct code is entered the
selected channel can be watched. After the Password box has disappeared you can use the buttons to
navigate to other channels. The scroll bar in the middle of the screen shows the relative position of the current
channel with respect to the whole list.

5.1.2. DELETING UNWANTED CHANNEL

To delete a channel highlight it using " / " RED/GREEN, then highlight the "Delete" button using " / "and press
SELECT. A message is displayed to confirm your decision, if you still want to delete press SELECT once more and
the channel will be deleted, the operation will be cancelled if you select "NO".
5.1.3. RENAMING CHANNELS
To rename a specific channel, the channel must be highlighted. Select "Edit Name" button and press SELECT. The
name appears on the right side of the menu with the first character highlighted. By means of " / / / " keys the
characters can be changed.Pressing MENU cancels the editing and SELECT saves the new name.
5.1.4. ADDING LOCKS TO CHANNELS
Channel Locking provides a password-protected access to channels selected by parents. In order to lock a channel
you should know the parental Lock password (set to 0000 in the factory and can only be changed from the
Configuration Menu), highlight the channel to be locked and select the "Lock" button, when SELECT is pressed a
password dialog is displayed. Enter the parental Lock code and the Lock icon will be displayed in front of the
selected channel. Repeat the same operation to cancel the Lock.
11