Information; Troubleshooting Guide - Emerson EWD2204 Owner's Manual

Emerson dvd/cd player with video cassette recorder owner's manual ewd2204
Hide thumbs Also See for EWD2204:
Table of Contents

Advertisement

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the follow-
ing checklist.
PROBLEM
D
No power.
V
D
This unit does not respond to
V
the remote control.
C
R
Timer recording is impossible.
V
C
R
Cannot go into Record mode.
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL
Cannot view a tape but the
audio is OK.
No, or poor, playback picture.
TV programs cannot be seen
normally.
Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
making a copy of a video tape.
Cannot remove the tape.
No picture.
D
V
D
Disc cannot be played .
No sound .
No DTS audio is output .
Distorted picture .
Audio or subtitle language
does not match the set up.
The camera angle cannot be
changed.
Audio or subtitle language
cannot be changed.
"Prohibited icon" appears on the • That operation is prohibited by this unit or the disc.
screen, prohibiting an operation
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual
for details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.

Information

• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the
obstacles between the sensor and the remote.
• You have to be within 23 feet of this unit.
• Check if the right mode is selected. If it's not in the right mode, press the DVD or
VCR buttons, whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-
ume up, then. If you hear some signal sound from the radio in response to your
pressing buttons on the remote, the remote control is working.
• Make sure the timer recording is set correctly.
• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTI-
TLE/T-SET button.
• Make sure the VCR clock is set correctly.
• Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
• Activate this unit in VCR mode. Press the VCR button on the remote control so that the
green VCR OUTPUT light is lit.
on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.
• Head cleaning may be necessary. Refer to "AUTO HEAD CLEANING" .
• Make sure the VCR is not in the Menu mode.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.
• Press the VCR/TV button.
• Press the VCR button on the remote control to activate it in the VCR mode. Check if the green
VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.
• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control
to switch the mode.
• Connect the video cables firmly.
• Insert a correct video disc that plays on this unit.
• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then
try other DVD features.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or
dusts on its surface.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the DVD.
This is not a malfunction.
• The DVD does not contain sequences recorded from different camera angles.
This is not a malfunction.
• The DVD does not contain audio source or subtitles in the selected language.
This is not a malfunction.
This is not a malfunction.
– 23 –
CORRECTIVE ACTION
(
)
buttons
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents