Download Print this page

Hitachi CM776ET User Manual page 10

Hide thumbs

Advertisement

INSTALLATION
(Continued)
Connecting
the monitor
";
F
R
s
s
.-
S
P
A
P
T
Base
Front
View
to a Doweroutlet
to the hos
of the correctvoltage
computer
1. Installation
Install the monitor in an suitable environment.
~ @ Do not place the monitor on an unstable base.
~ @ Do not expose the monitor to rain, moisture, dust, corrosive gases, vibrations, etc.
so as to prevent electrical shock or fire hazard.
\ @ Avoid placing the monitor in direct sunlightor near heating appliances.
2. Signal
Cable Connection
Insert the signal input connector of the monitor to the host computer, with attention to the
suitability, and secure the screws on the connector shell firmly.
3. Power
Cord Connection
(1)
Make sure to use the power cord meeting the safety standard of the country in which
you are using the monitor.
(2) Insert the connector of a power cord to the AC Inlet of the monitor.
(3) Inserl the plug of the power cord to a power outlet of the correct voltage.
~ ~
Before inserting the plug of the power cord into a power outlet of the correct
voltage, check that the connection portion of the power cord is clean (with no dust).
Then, inserl the plug of power cord into a power outlet firmly to avoid electrical
shock or fire hazard.
1-8

Advertisement

loading

  Related Manuals for Hitachi CM776ET