Preparation For Use - Emerson EWT1321 Owner's Manual

PREPARATION FOR USE

LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1
Connect the power cord to a standard AC outlet.
2
Press the POWER button to turn on the TV.
3
Press the MENU button so that the menu display appears
on the TV screen.
4
Press the CH(annel) or button to point to "[ENGLISH]".
5
Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume) or button.
6
Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1
Press the POWER button to turn on the TV.
2
Press the MENU button so that the menu display appears
on the TV screen.
3
Press the CH(annel) or button to point to "CHANNEL SET".
Then, press the VOL(ume) button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)
3) Adjust the volume to the desired listening level using the VOL(ume)
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time with pressing the SLEEP
button on the remote control repeatedly. The timer is set up
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
: Press the VOL(ume) or button.
PICTURE PICTURE
CHANNEL SET CHANNEL SET
[ENGLISH]ESPAÑOL [ENGLISH]ESPAÑOL
V-CHIP SET UP V-CHIP SET UP
CAPTION [OFF] CAPTION [ C1]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
or button.
or button.
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) or
to "CAPTION".
3) Press the VOL(ume) or
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE PICTURE
CHANNEL SET CHANNEL SET
[ENGLISH]ESPAÑOL [ENGLISH]ESPAÑOL
V-CHIP SET UP V-CHIP SET UP
CAPTION [ C2] CAPTION [ T1]
4
Press the CH(annel)
Then, press the VOL(ume)
The tuner scans and memorizes all active channels in
your area.
The TV distinguishes between standard TV channels
and cable channels.
When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
When you press the CH(annel)
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
The TV may recognize TV channels to be CATV channels
by the receiving conditions. In this case, try AUTO MEMO action again
in the fine receiving conditions.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel)
Then, press the VOL(ume)
3) Press the VOL(ume)
4) Use the CH(annel)
channel you wish to put into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
Press the VOL(ume)
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume)
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume)
3) Select the feature you wish to adjust with the CH(annel)
VOL(ume) or
GAME MODE
Set to the most suitable position for TV
GAME.
[+] : ON
[-] : OFF
BRIGHT
Adjust until the whitest parts of the picture are
SLEEP 10
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
button to point
TINT
Adjust to obtain natural skin tones.
button to select
[+] : greenish tone
[-] : reddish tone
: Press the CH(annel)
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
[-] [+]
GAME MODE
CAPTION [ T2]
OFF ON
or button to point to "AUTO MEMO".
button.
or button after
or button to point to "CHANNEL SET".
button.
button so that "ADD/DELETE" is selected.
or button to select the
or button to light up the channel number
or button to light up the channel number
button so that "PICTURE" is selected.
button.
Notes:
In the above steps, the picture adjustment
display will disappear from the TV screen
after about 10 seconds unless you press any
buttons, even though you may not be fin-
ished. Press the MENU and VOL(ume)
button so that "PICTURE" is selected. Then,
press the CH(annel)
edly until the display returns to the screen.
If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically. If you
want to set the Game mode, reset it to [ON].
or button.
[-] [+] [-] [+]
BRIGHT CONTRAST
ADD/DELETE
AUTO MEMO
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
or button and adjust it with the
or button repeat-
[-] [+] [-] [+]
COLOR TINT