Advertisement
Available languages
Available languages
Operating modes:
If your wireless router has a WPS button, setup will be easy and all
automatic. Some wireless routers that support WPS do not have a
dedicated button but use a PIN code instead. For setup using a PIN
code, you will need to know in advance how to activate the wireless
router's WPS function.
1 Press T to set the camcorder to playback mode and then
press
2 Set up a new connection point.
[
Wi-Fi]
connection point ([
[WPS: Button] or [WPS: PIN Code], depending on whether
your wireless router has a WPS button or uses a PIN code
* To replace the settings of an existing connection point, touch [Edit] instead and
then manually change the settings. To delete the settings, touch [Delete] and
then [Yes].
• You can set up up to three connection points for infrastructure mode
([
1] to [
without any further settings.
6
.
>
[Wi-Fi Setup]
1] to [
3]). Once set up, you can use the same Wi-Fi network
Place the camcorder on a table or
similar surface and then use the Wi-Fi
functions, as shown in the illustration
on the left.
>
[Network Setup]
>
3])
[Set Up New]*
>
Desired
>
Advertisement
