Table of Contents
Advertisement
NOTE: If the
already selected then your iPod
connected to the dock, as long as the iPod
®
iPod
enters the Pause mode when you connect it to the dock, press the
Play/pause
®
7.) Once the iPod
select among the menu items as usual. However you can only adjust the
volume level by using the Volume +/– controls on the top panel or remote
control of this unit. The click wheel volume control on the iPod
used to control the speaker volume level of this system.
8.) To skip or search forward or back to the next or previous song you can use
the Tuning/Skip
the remote control.
Play/pause
9.) The
control have the same function as the
Press once to begin playback. Press again to pause playback. Press and
hold to shut the iPod
10.) When you have finished listening to your iPod
button to switch to the TUNER function. Your iPod
You may also press the
will shut off and the recharging circuit turns on automatically.
If you remove your iPod
close the docking compartment cover again to keep dust and other foreign
objects out of the docking area.
NOTES:
• If you remove your iPod
power to this system is shut ' Off' automatically.
• If you have a power failure while the iPod
be shut off automatically to preserve the iPod
iC200_NCab050307.p65
Power of this system is ' On' and the iPod function is
®
button to begin playback.
is playing you can use the navigation controls on the iPod
or
buttons on the top panel or the
buttons on the top panel of this system and the remote
®
' Off' .
Power button to shut this system ' Off' . Your iPod
®
from the docking connector we suggest that you
®
from the docking connector during playback the
29
29
will begin to play as soon as it is
®
HOLD switch is ' Off' . If your
Play/Pause
button on your iPod
®
you may press the Function
®
will shut off automatically.
®
is playing the iPod
®
internal battery.
3/5/2007, 11:29
®
to
®
cannot be
/
buttons on
®
.
®
®
power will
Hide quick links:
Advertisement
Table of Contents
