Presser Foot Types; Zigzag Foot (Foot A); Straight Stitch Foot (Foot H); Automatic Buttonhole Foot (Foot R) - Kenmore 19233 - Computerized Drop-In Bobbin Sewing Machine Owner's Manual

Presser foot types
• Zigzag foot (Foot A)
Use this foot for both straight and zigzag stitching.
• Straight stitch foot (Foot H)
Use this foot for straight stitching only with the center
needle position.
• Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonholing.
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
the buttonhole as the button.
• Zipper foot (Foot E)
This foot can be set to sew on each side of the zipper.
The edges of the foot guide the zipper and keep the seam
straight.
• Blind hem stitch foot (Foot G)
Use this foot for perfect blind hemming and topstitching.
The foot has ridges on the bottom to keep the fabric from
slipping, and a screw on top to guide the folded edge of
your hem.
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
• Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
• Overcast foot (Foot M)
This foot is specially designed to simulate prefessional
style overlocking. The wires on the foot effectively prevent
the fabric edge from puckering or rolling.
I
Foot A:
Prensatelas A:
Pied A:
Foot H:
Prensatelas H:
Pied H:
Foot R:
Prensatelas R:
Pied R:
Foot E:
Prensatelas E:
Pied E:
Foot G:
Prensatelas G:
Pied G:
Foot F:
Prensatelas F:
Pied F:
Foot C:
Prensatelas C:
Pied C
Foot M:
Prensatelas M:
Pied M:
J
J
J
J
J
1
22