Setting The Flash Mode - Nikon COOLPIX S9050 Reference Manual

Setting the Flash Mode

1
Slide the K (flash pop-up) control.
The flash pops up.
When the flash is lowered, the flash mode will be fixed at
W (off).
2
Press the rotary multi selector m (flash mode).
The flash mode menu is displayed.
3
Use the rotary multi selector to choose the
desired mode and press the k button.
The icon for the selected flash mode is displayed.
When U (auto) is applied, D is only displayed for a
few seconds, regardless of Photo info settings (A 173).
If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
B
Lowering the Flash
If the flash will not be used, gently lower the flash until it clicks into
place.
Using the Flash
Flash mode
2 5 2 5
33